Clifford Remote Start Valet Mode. Press the arm/disarm button on the clifford alarm's remote control. At that time the led should be on and constant.
Activating valet mode may be a necessary step when handing off your vehicle to a service professional. To view a guide, click on its download link. Press the valet button on your remote.
Press The Square Right Button Twice On The Clifford Alarm’s Valet Switch Mounted In The Vehicle.
I had the same problem at one time on another car with a clifford g4. Best way is to locate the starter control module and check each interlock with a meter. Press the valet button on your remote.
In Other Words If The Key You Have To Start Your Vehicle Has A Resistor In It Or Something Of That Nature Then A Bypass Box Is Used.
Press unlock on the transmitter. Valet mode is a setting/feature your remote starter has, that allows you to disable the ability to remote start the vehicle. Within 10 secs, press and release the valet button.
The Clifford Alarm System Is A Popular Security System For Vehicles With Features Such As Automatic Engine Disable, Code Hopping, Passive Arming And Starter Kill.
If so, try pressing the two bottom buttons on the remote at the same time near the car. Valet mode is a setting in compustar and arctic start systems that will shut down the alarm system and the remote starter. Disabling a clifford alarm system is a simple process that can be done in a matter of minutes.
Activating Valet Mode May Be A Necessary Step When Handing Off Your Vehicle To A Service.
Turn ignition on and then off. Valet mode is a setting in compustar and arctic start systems that will shut down the alarm system and the remote starter. Press the valet button 15 seconds between each press to disable the alarm system.
Use The Security / Remote Start System In Your Car If You Bought A Used Car That Has A Valet Switch Or Button Most Likely You Can Order A New Remote.
It is designed to be used when you take your vehicle in for service or if you are lending the vehicle out and wish to prohibit (ie turn off) the ability to. Turn your key to the run position to engage the starter transmitter. Valet mode is a setting in compustar and arctic start systems that will shut down the alarm system and the remote starter.